This policy setting limits the network bandwidth that Background Intelligent Transfer Service (BITS) uses for background transfers. (This policy setting does not affect foreground transfers. ) You can specify a limit to use during a specific time interval and at all other times. For example limit the use of network bandwidth to 10 Kbps from 8:00 A. M. to 5:00 P. M. and use all available unused bandwidth the rest of the day’s hours. If you enable this policy setting BITS will limit its bandwidth usage to the specified values. You can specify the limit in kilobits per second (Kbps). If you specify a value less than 2 kilobits BITS will continue to use approximately 2 kilobits. To prevent BITS transfers from occurring specify a limit of 0. If you disable or do not configure this policy setting BITS uses all available unused bandwidth. Note: You should base the limit on the speed of the network link not the computer’s network interface card (NIC). This policy setting does not affect Peercaching transfers between peer computers (it does affect transfers from the origin server); the “Limit the maximum network bandwidth used for Peercaching” policy setting should be used for that purpose. Consider using this setting to prevent BITS transfers from competing for network bandwidth when the client computer has a fast network card (10Mbs) but is connected to the network via a slow link (56Kbs).