Tag: Computer Configuration
Set Teredo Default Qualified
This policy setting allows you to set Teredo to be ready to communicate a process referred to as qualification. By default Teredo enters a dormant state when not in use. The qualification process brings it out of a dormant state. If you disable or do not configure this policy setting the local host setting is used. This policy setting contains only one state:Policy Enabled State: If Default Qualified is enabled Teredo will attempt qualification immediately and remain qualified if the qualification process succeeds.
Set IP-HTTPS State
This policy setting allows you to configure IP-HTTPS a tunneling technology that uses the HTTPS protocol to provide IP connectivity to a remote network. If you disable or do not configure this policy setting the local host settings are used. If you enable this policy setting you can specify an IP-HTTPS server URL. You will be able to configure IP-HTTPS with one of the following settings:Policy Default State: The IP-HTTPS interface is used when there are no other connectivity options. Policy Enabled State: The IP-HTTPS interface is always present even if the host has other connectivity options. Policy Disabled State: No IP-HTTPS interfaces are present on the host.
Set Window Scaling Heuristics State
This policy setting allows you to configure Window Scaling Heuristics. Window Scaling Heuristics is an algorithm to identify connectivity and throughput problems caused by many Firewalls and other middle boxes that don’t interpret Window Scaling option correctly. If you do not configure this policy setting the local host settings are used. If you enable this policy setting Window Scaling Heuristics will be enabled and system will try to identify connectivity and throughput problems and take appropriate measures. If you disable this policy setting Window Scaling Heuristics will be disabled and system will not try to identify connectivity and throughput problems casued by Firewalls or other middle boxes.
Set IP Stateless Autoconfiguration Limits State
This policy setting allows you to configure IP Stateless Autoconfiguration Limits. If you enable or do not configure this policy setting IP Stateless Autoconfiguration Limits will be enabled and system will limit the number of autoconfigured addresses and routes. If you disable this policy setting IP Stateless Autoconfiguration Limits will be disabled and system will not limit the number of autoconfigured addresses and routes.
Prohibit Task Deletion
Prevents users from deleting tasks from the Scheduled Tasks folder. This setting removes the Delete command from the Edit menu in the Scheduled Tasks folder and from the menu that appears when you right-click a task. Also the system does not respond when users try to cut or drag a task from the Scheduled Tasks folder. Note: This setting appears in the Computer Configuration and User Configuration folders. If both settings are configured the setting in Computer Configuration takes precedence over the setting in User Configuration. Important: This setting does not prevent administrators of a computer from using At. exe to delete tasks.
Set ISATAP State
This policy setting allows you to configure Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) an address-to-router and host-to-host host-to-router and router-to-host automatic tunneling technology that is used to provide unicast IPv6 connectivity between IPv6 hosts across an IPv4 intranet. If you disable or do not configure this policy setting the local host setting is used. If you enable this policy setting you can configure ISATAP with one of the following settings:Policy Default State: If the ISATAP router name is resolved successfully the host will have ISATAP configured with a link-local address and an address for each prefix received from the ISATAP router through stateless address auto-configuration. If the ISATAP router name is not resolved successfully ISATAP connectivity is not available on the host using the corresponding IPv4 address. Policy Enabled State: If the ISATAP name is resolved successfully the host will have ISATAP configured with a link-local address and an address for each prefix received from the ISATAP router through stateless address auto-configuration. If the ISATAP name is not resolved successfully the host will have an ISATAP interface configured with a link-local address. Policy Disabled State: No ISATAP interfaces are present on the host.
Set ISATAP Router Name
This policy setting allows you to specify a router name or Internet Protocol version 4 (IPv4) address for an ISATAP router. If you enable this policy setting you can specify a router name or IPv4 address for an ISATAP router. If you enter an IPv4 address of the ISATAP router in the text box DNS services are not required. If you disable or do not configure this policy setting the local host setting is used.
Set 6to4 State
This policy setting allows you to configure 6to4 an address assignment and router-to-router automatic tunneling technology that is used to provide unicast IPv6 connectivity between IPv6 sites and hosts across the IPv4 Internet. 6to4 uses the global address prefix: 2002:WWXX:YYZZ::/48 in which the letters are a hexadecimal representation of the global IPv4 address (w. x. y. z) assigned to a site. If you disable or do not configure this policy setting the local host setting is used. If you enable this policy setting you can configure 6to4 with one of the following settings:Policy Default State: 6to4 is enabled if the host has only link-local IPv6 connectivity and a public IPv4 address. If no global IPv6 address is present and no global IPv4 address is present the host will not have a 6to4 interface. If no global IPv6 address is present and a global IPv4 address is present the host will have a 6to4 interface. Policy Enabled State: If a global IPv4 address is present the host will have a 6to4 interface. If no global IPv4 address is present the host will not have a 6to4 interface. Policy Disabled State: 6to4 is turned off and connectivity with 6to4 will not be available.
Set 6to4 Relay Name
This policy setting allows you to specify a 6to4 relay name for a 6to4 host. A 6to4 relay is used as a default gateway for IPv6 network traffic sent by the 6to4 host. The 6to4 relay name setting has no effect if 6to4 connectivity is not available on the host. If you enable this policy setting you can specify a relay name for a 6to4 host. If you disable or do not configure this policy setting the local host setting is used and you cannot specify a relay name for a 6to4 host.
Set 6to4 Relay Name Resolution Interval
This policy setting allows you to specify the interval at which the relay name is resolved. The 6to4 relay name resolution interval setting has no effect if 6to4 connectivity is not available on the host. If you enable this policy setting you can specify the value for the duration at which the relay name is resolved periodically. If you disable or do not configure this policy setting the local host setting is used.